China Standard GS-44X34.5 Aluminum Alloy Single Diaphragm Clamping Couplin shaft collar bracket

Product Description

GS-44×34.5 Aluminum alloy single diaphragm clamping coupling

Description of GS-44×34.5 Aluminum alloy single diaphragm clamping coupling
>High torque rigidity, can accurately control the rotation of the shaft, can carry out high-precision control
>Designed for servo and stepping motor
>No gap between the shaft and sleeve connection, general for positive and negative rotation
>Low inertia, suitable for high speed operation
>The diaphragm is made of spring steel with excellent fatigue resistance
>Fastening method of clamping screw

 

Catalogue of GS single diaphragm clamping coupling
 

model parameter common bore diameter d1,d2 ΦD L LF S F M tightening screw torque
(N.M)
GS-19X20 3,4,5,6,6.35,7,8 19 20 9.1 1.8 3.3 M2.5 1
GS-26X26 3,4,5,6,6.35,7,8,9,9.525,10,11,12,14 26 26 11.65 2.6 3.9 M3 1.5
GS-32X28 5,6,6.35,7,8,9,9.525,10,11,12,12.7,14,15, 32 28 12.25 3.5 3.85 M3 1.5
GS-34X32 5,6,6.35,7,8,9,9.525,10,11,12,12.7,14,15,16 34 32 14.25 3.5 4.85 M4 2.5
GS-39X34.5 8,9,9.525,10,11,12,12.7,14,15,16,17,18,19 39 34.5 14.9 4.5 5 M4 2.5
GS-44X34.5 8,9,9.525,10,11,12,12.7,14,15,16,17,18,19,20,22,24 44 34.5 14.9 4.5 5 M4 2.5
GS-50X46 8,9,9525,10,11,12,12.7,14,15,16,17,18,19,20,22,24,25 50 46 20.6 4.8 6 M5 7
GS-56X45 10,12,14,15,16,17,18,19,20,22,24,25,28,30,32 56 45 19.75 5.5 6.4 M5 7
GS-68X53 12,14,15,16,17,18,19,20,22,24,25,28,30,32,35,38 68 53 23.35 6.3 7.7 M6 12

model parameter Rated torque allowable eccentricity allowable deflection angle allowable axial deviation maximum speed static torsional stiffness moment of inertia Material of shaft sleeve Material of shrapnel surface treatment weight
(N.M)* (mm)* (°)* (mm)* rpm (N.M/rad) (Kg.M2) (g)
GS-19X20 1 0.1 1 ±0.09 1000 220 6.7×10-6 High strength aluminum alloy S U S 3 0 4 Spring steel Anodizing treatment 11
GS-26X26 1.5 0.1 1 ±0.14 11000 1125 2.2×10-6 28
GS-32×28 2 0.1 1 ±0.18 11000 21000 7.1×10-6 46
GS-34X32 3 0.1 1 ±0.18 11000 2250 8.0×10-6 55
GS-39X34.5 6 0.1 1 ±0.23 11000 3900 2.2×10-5 81
GS-44X34.5 9 0.1 1 ±0.27 11000 4500 2.8×10-5 99
GS-55X46 18 0.1 1 ±0.30 11000 6500 2.5×10-5 135
GS-56X45 25 0.1 1 ±0.36 11000 12900 1.2×10-4 217
GS-68X53 60 0.1 1 ±0.4 9000 25800 1.5×10-4 348
GS-82X68 100 0.1 1 ±0.5 8000 38700 1.8×10-5 689

 

 

 

Standard Or Nonstandard: Standard
Shaft Hole: 3-42
Torque: 1-100
Bore Diameter: 3-42
Speed: 8000-11000
Structure: Flexible
Customization:
Available

|

Customized Request

shaft clamp

Can I find tutorials on retrofitting machinery with shaft clamps for improved performance?

If you are looking for tutorials on retrofitting machinery with shaft clamps for improved performance, here’s a detailed explanation:

Retrofitting machinery with shaft clamps can be a beneficial solution to enhance performance, stability, and efficiency. While specific tutorials may vary depending on the machinery and application, there are several resources where you can find guidance and information on retrofitting with shaft clamps:

1. Manufacturer’s Documentation:

Consult the manufacturer’s documentation or user manuals for the machinery you intend to retrofit. The documentation may provide insights into the recommended retrofitting procedures, including the installation of shaft clamps. It may include step-by-step instructions, diagrams, and specifications specific to your machinery.

2. Online Video Platforms:

Platforms like YouTube and Vimeo host a vast collection of tutorial videos on various engineering and machinery topics. You can search for videos specifically related to retrofitting machinery with shaft clamps. These videos often provide visual demonstrations, explanations of the process, and tips for achieving improved performance through retrofitting.

3. Engineering Websites and Blogs:

Engineering websites and blogs may publish informative articles or tutorials on retrofitting machinery. These resources may cover a wide range of topics, including the selection of shaft clamps, installation techniques, and considerations for improved performance. Look for reputable engineering websites and blogs that specialize in machinery retrofitting, mechanical engineering, or industrial automation.

4. Online Forums and Communities:

Participating in online forums and communities focused on machinery, engineering, or industrial topics can provide valuable insights and guidance. These platforms often have discussion threads where professionals and enthusiasts share their experiences, best practices, and tutorials related to retrofitting machinery. Engaging in these communities allows you to ask questions, seek advice, and learn from others who have undertaken similar retrofitting projects.

5. Professional Training and Courses:

Consider professional training programs or courses offered by engineering organizations, trade associations, or industrial training institutes. These programs may include modules on machinery retrofitting techniques, which can cover the installation and performance optimization of shaft clamps. These training programs often provide comprehensive guidance and practical knowledge to help you successfully retrofit machinery.

When retrofitting machinery with shaft clamps, it’s important to ensure that you have a good understanding of the machinery’s design, compatibility requirements, and safety considerations. If you are unsure or lack experience, it’s recommended to consult with qualified engineers, technicians, or professionals who specialize in machinery retrofitting. They can provide personalized guidance, address specific challenges, and ensure that the retrofitting process is carried out effectively and safely.

shaft clamp

Can I find guidelines on lubricating and maintaining shaft clamps for optimal performance?

Yes, guidelines for lubricating and maintaining shaft clamps can be found to ensure optimal performance. Here’s a detailed explanation:

When it comes to lubricating and maintaining shaft clamps, it’s important to refer to the manufacturer’s guidelines and recommendations specific to the type of clamp being used. These guidelines may vary depending on the design, materials, and intended application of the shaft clamp. However, here are some general considerations:

1. Lubrication:

Some shaft clamps may require lubrication to reduce friction and ensure smooth operation. The type of lubricant and the frequency of lubrication will depend on the specific clamp design and the environmental conditions in which it operates. It’s important to use lubricants that are compatible with the materials of the clamp and the shaft to avoid degradation or damage. The manufacturer’s guidelines will provide specific recommendations on the appropriate lubrication method and lubricant type.

2. Inspection and Cleaning:

Regular inspection and cleaning of the shaft clamps are essential for maintaining optimal performance. Inspect the clamps for any signs of wear, damage, or misalignment. Clean the clamps to remove any dirt, debris, or contaminants that may affect their operation. Use appropriate cleaning methods and avoid using harsh chemicals that could damage the clamp or its surface finish.

3. Torque Checks:

Over time, the clamping force of the shaft clamp may diminish due to factors such as vibration or thermal expansion. It’s important to periodically check and verify the torque settings of the clamp to ensure that it maintains the desired clamping force. This can be done using torque wrenches or other suitable torque measurement tools as specified by the manufacturer.

4. Environmental Considerations:

Consider the operating environment of the shaft clamp when determining the maintenance requirements. In harsh or corrosive environments, additional protective measures may be necessary to prevent corrosion or deterioration of the clamp. This can include applying protective coatings or using corrosion-resistant materials.

5. Replacement and Spare Parts:

If a shaft clamp shows signs of significant wear or damage that cannot be remedied through maintenance, it may be necessary to replace the clamp. Ensure that replacement clamps or spare parts are obtained from reputable sources and are compatible with the specific clamp design.

It’s important to note that these are general considerations, and the specific maintenance requirements for shaft clamps may vary. Always consult the manufacturer’s guidelines and recommendations for the particular make and model of the shaft clamp to ensure proper lubrication and maintenance practices are followed. Adhering to these guidelines will help optimize the performance, longevity, and reliability of the shaft clamps in your machinery.

shaft clamp

Are there reviews on popular brands of shaft clamps for user feedback?

Yes, there are reviews available for popular brands of shaft clamps that provide valuable user feedback. These reviews can help you gain insights into the performance, quality, and overall satisfaction of users who have used the shaft clamps from different brands. Here are some ways to access and find user reviews:

1. Online Retailers and Marketplaces: Popular online retailers and marketplaces like Amazon, eBay, or specialized industrial supply websites often feature customer reviews and ratings for the products they sell, including shaft clamps. Visit the product listing pages of specific brands or models of shaft clamps to read the reviews provided by customers who have purchased and used the products.

2. Manufacturer Websites: Some shaft clamp manufacturers have dedicated sections on their websites where customers can leave reviews or testimonials about their products. Visit the websites of the brands you are interested in to see if they provide user feedback. These reviews can give you a firsthand perspective on the experiences of other users with their shaft clamps.

3. Online Forums and Discussion Boards: Online forums and discussion boards related to mechanical engineering, industrial applications, or specific industries often have threads or discussions where users share their experiences and opinions on various products, including shaft clamps. Participating in these communities and asking for recommendations or feedback can provide you with valuable insights from professionals and enthusiasts who have hands-on experience with different brands.

4. Social Media Groups and Communities: Joining relevant social media groups and communities focused on engineering, manufacturing, or industrial applications can be another way to find user reviews. These groups often have members who are willing to share their experiences, offer recommendations, and provide feedback on specific brands or models of shaft clamps they have used.

5. Professional Networks and Associations: Engaging with professional networks and industry associations can also help you find user feedback on popular brands of shaft clamps. Attend industry events, conferences, or seminars where professionals gather, and take the opportunity to discuss and exchange information about different brands and their performance. Additionally, reaching out to colleagues, peers, or professionals in your field and asking for their recommendations and experiences can provide valuable insights.

By exploring these sources, you can access a variety of user reviews and feedback on popular brands of shaft clamps. It is important to consider multiple reviews and opinions to get a well-rounded understanding of the strengths and weaknesses of different brands and models. This information can guide you in making an informed decision when selecting shaft clamps for your specific application.

China Standard GS-44X34.5 Aluminum Alloy Single Diaphragm Clamping Couplin   shaft collar bracketChina Standard GS-44X34.5 Aluminum Alloy Single Diaphragm Clamping Couplin   shaft collar bracket
editor by CX 2023-11-03