China Shaft Mount TXT Reducer American Style Gearbox Gear Reducer split shaft collar

Solution Description

SMRY Reducer Specification
 
 
1 Twin Tapered Output Hub
A  tapered  bore   in   both   sides   of   the reducer’s output hub snugs up against a matching taper on the outer surface of the bushing. Bushing mounting screws pass by way of the bushing flange into a mounting collar  on  the  hub.  As  the  screws  are tightened,   the    bushing   moves    inward, gripping the driven machine’s input shaft tightly and evenly around every point on its circumference. It is  easy-on, easy-off. All the Output Bushing Bore accord to ANSI

2 PrecrisioHigh Qua  lity Gearing
C ompu ter D e s i g n He lical .Gears, Robust Alloy Materials for High Load Capability, Situation Carburized for long life, Ground Profile Crown tooth Profile, In
Conformance  with  ISO  1328-1997,  98%  Efficiency  for  Per  Stage,  Smooth  Quiet Operation with Several Teeth in Mesh.
3 Maximum Ability Housing Style
Close  Grain  Cast  Iron  Construction,  Excellent  Vibration  Dampening  &  Shock Resistance Functions, Precision Bored and Dowelled to Make sure Exact In-Line Assembly.
four Strong Alloy Steel Shafts
Sturdy Alloy Metal, Hardened, Ground on Journals, Gear Seatings and Extensions, for Maximum Load and Maximum Torsional Loads. Generous Dimension Shaft
Keys for Shock Loading .
Use adapter for mount the torque arm, increase the strength of the gear case, the torque arm easy-on and easy-off and trustworthiness, controls position of standard torque arm mounting within recommended limits.
6 BackStops
Substitute Areas, anti-run back device, are available on all 15:1 and 25:1 ratio units.
seven Bearings and Oilseals
Bearings are all tapered roll bearings(Except SMRY-2), have long time service time. Oilseals are Double Lipped Garter Spring Type, Making certain Effective Oil
Sealing.
8 Torque Arm Assembly
For Simple Adjustment of the Belt.

 

size Nominal ratio 15:1 Nominal ratio 25:1 weight
lbs
 
Actual Ratio Maximum Input  rpm Maximum Ouput  rpm Actual Ratio Optimum Input  rpm Greatest Ouput  rpm
SMRY-two fourteen.04 1974 one hundred forty 23.37 1994 85 fifty eight
SMRY-three fourteen.87 2083 a hundred and forty 24.75 2100 85 98
SMRY-four 15.13 2118 one hundred forty 24.38 2072 85 139
SMRY-5 fifteen.4 1925 a hundred twenty five twenty five.fifty six 2044 eighty 207
SMRY-6 15.34 1916 125 twenty five.fourteen 2571 80 285
SMRY-seven 15.23 1827 120 24.eighty four 1863 seventy five 462
SMRY-eight fifteen.08 1809 120 24.sixty two 1847 75 633
SMRY-9 15.twelve 1814 120 25.sixty six 1925 seventy five 760

size SMRY-2, 3,4,5,6,7,8,9 , ratio 15:1 ,twenty five:1

 

 

Business Profile

l  The greatest company and exporter of worm equipment reducers in Asia.

 

l  Established in 1976, we transformed from a county owned manufacturing facility to non-public 1 in 1996. HangZhou SINO-DEUTSCH Electrical power TRANSMISSION Gear CO.,LTD is our new identify because 2001.

 

l  We are the 1st producer of reducers and gearboxes in China who was given export license given that yr 1993.

 

l  “Fixedstar” model gearboxes and reducers are the first owner of CHINA Best Brand and Most Well-known Trade Mark for reducers.
 

1st to achieve ISO9001 and CE Certification between all makers of gearboxes in China.

   

 

 

 As a specialist manufacturer of worm gearbox and worm equipment reducers in China, we primarily produce reduction gearbox,aluminum circumstance worm gearboxes,arc gear cylindrical worm gearboxes, worm gear reducers, in line helical gearboxes, and cyclo push reducers, and many others. These goods feature rational composition, stable efficiency, and trustworthy quality, and so on. They are broadly utilised in electrical power, mining, metallurgy, constructing content, chemical, meals, printing, ceramic, paper-making, tobacco, and other industries.

 

  

We have 600 employees in our manufacturing facility, which covers 70,000 sq. meters in HangZhou. We have been making 2,500 models of reducers daily considering that 2012. We are proudly exporting 70% of our products to much more than forty nations around the world all over the term. Our customers occur from Italy, Germany, United states of america, Canada, Spain, Uk, Mexico, Brazil, Argentina, Turkey, Singapore and other principal industrial international locations in the globe. 30% of them are OEM manufactured for direct makers of other items. 

  

 

 

We warmly welcome buyers from other elements of the entire world to go to us. Observing is believing. We are quite assured that soon after visiting our facility, you will have confidence on our merchandise. We have the latest computerized equipments and skilled employees to guarantee the secure top quality and huge output. We have the most sophisticated technological and engineering team to assistance most demanding need on common and OEM goods.

 

 

Searching forward to conference you in HangZhou, China.

US $198
/ Piece
|
1 Piece

(Min. Order)

###

Application: Reducer
Hardness: Hardened
Type: Bevel Gear
Size: 2-9
Material: Cast Iron
Manipulate Way: Robotics

###

Customization:

###

size Nominal ratio 15:1 Nominal ratio 25:1 weight
lbs

 
Actual Ratio Maximum Input  rpm Maximum Ouput  rpm Actual Ratio Maximum Input  rpm Maximum Ouput  rpm
SMRY-2 14.04 1974 140 23.37 1994 85 58
SMRY-3 14.87 2083 140 24.75 2100 85 98
SMRY-4 15.13 2118 140 24.38 2072 85 139
SMRY-5 15.4 1925 125 25.56 2044 80 207
SMRY-6 15.34 1916 125 25.14 2010 80 285
SMRY-7 15.23 1827 120 24.84 1863 75 462
SMRY-8 15.08 1809 120 24.62 1847 75 633
SMRY-9 15.12 1814 120 25.66 1925 75 760
US $198
/ Piece
|
1 Piece

(Min. Order)

###

Application: Reducer
Hardness: Hardened
Type: Bevel Gear
Size: 2-9
Material: Cast Iron
Manipulate Way: Robotics

###

Customization:

###

size Nominal ratio 15:1 Nominal ratio 25:1 weight
lbs

 
Actual Ratio Maximum Input  rpm Maximum Ouput  rpm Actual Ratio Maximum Input  rpm Maximum Ouput  rpm
SMRY-2 14.04 1974 140 23.37 1994 85 58
SMRY-3 14.87 2083 140 24.75 2100 85 98
SMRY-4 15.13 2118 140 24.38 2072 85 139
SMRY-5 15.4 1925 125 25.56 2044 80 207
SMRY-6 15.34 1916 125 25.14 2010 80 285
SMRY-7 15.23 1827 120 24.84 1863 75 462
SMRY-8 15.08 1809 120 24.62 1847 75 633
SMRY-9 15.12 1814 120 25.66 1925 75 760

Common Uses for the Shaft Collar

The shaft collar is a relatively simple machine component, but one of the most important in many power transmission applications. It is most often used in gearboxes and motors, where it serves as a locating component, bearing face, and mechanical stop. Its simple design allows for easy installation and makes it ideal for a range of applications. Listed below are some of the most common uses for the shaft collar. Learn more about this important machine component.

Single split

Two-piece shaft collars are an excellent option for applications where a single piece collar is not practical. They provide the same benefits as one-piece collars, but with more convenience when installing. The two-piece collar has a clamp style, which allows the collar to be adjusted with a hand tool. They are suitable for light-duty applications and come in a variety of diameters. In addition to shaft diameters, collars are available with different threaded bore sizes. Shaft diameters are usually measured in mm. They can be easily installed and disassembled by removing the cap screws from each side.
Single split shaft collars come with a machine screw that tightens the clamp around the shaft. This ensures a tight, secure fit and better holding power than solid collars. They are easy to install, remove, and adjust, and work on virtually all types of shafts. The machine screw helps to prevent the collar from ripping the shaft.
Shaft collars come in a variety of materials. Typical materials include stainless steel, alloyed steel, and nylon. They are also available in custom sizes. If you want a specific size, be sure to specify that when ordering. These collars are made of quality materials, and they will hold up to the most rigorous applications.
Heavy duty shaft collars are manufactured from higher-grade materials than standard collars. They have a larger outer diameter, wider flange, and a larger screw for increased holding power. These collars are typically used in short-term, rigid coupling applications, and they are available in one-piece and two-piece clamp styles. These collars are typically made from 1215 lead-free steel or 303 stainless steel. Some of them can be finished with an anodized finish.
Mountable shaft collars are used to mount sensors, fixtures, and other assemblies. There are three different styles of mountable shaft collars: flange collars, flat collars, and quick-release collars. The material used for shaft collars can be 1215 lead-free steel with a black oxide finish, high-strength aluminum, and 303 stainless steel.
Shaft Collar

Solid

A solid shaft collar is a shaft coupling that is used to connect two shafts. They can be made of a variety of materials, including steel, zinc plated, and stainless steel. In addition, they come with various finishing options, including a zinc plated or black oxide finish. In addition, they can be made to fit a variety of shaft sizes and types.
Shaft collars are a simple, yet essential part of machine design. They can be found in virtually any piece of machinery. They can serve a variety of functions, including holding bearings on shafts, positioning components within motor assemblies, and acting as mechanical stops. While they can serve a variety of functions, they are most commonly used as bearing faces, mechanical stops, and locating components. They are also easy to install and tighten, making them a popular choice for a variety of different applications.
Solid shaft collars are available in two types: one-piece and two-piece. The two-piece collars are generally more rigid, offering better clamping force. However, they require more seating torque than the one-piece clamp collar. This is because there are more screws to tighten the two-piece collar than the single-piece collar.
One type of solid shaft collar is the set screw collar. Its holding power comes from the set screw, which is tightened onto the shaft. Ideally, the set screw should impinge on the shaft, and bite into it. The screw should be made of a softer material, as a harder material would reduce its holding power. However, the set screw collar can be adjusted by milling small flats into the shaft at the locations of the set screw.
A solid shaft collar is a simple machine component used in various power transmission applications. The most common places where it is used include motors, gearboxes, and bearings. Their simple design makes it easy to install and maintain. Unlike early versions, however, which were primarily made of square-headed set screws, modern shaft collars feature recessed set screws.
Shaft Collar

lamping-style

A Clamping-style shaft collar is an essential component of a gearbox or motor. Its high holding power allows it to hold components securely in place and ensure proper power transmission. These collars are also commonly used as spacers or to limit the movement of shafts during reciprocating motion.
These collars come in a variety of styles, including the double-split and semi-split varieties. They are ideal for repetitive positioning and are available in steel and stainless steel. They also feature a quick release element. And the index lever makes them easy to adjust or repair.
There are several different styles of shaft collars, including the Clamping-style shaft collar. The Clamping-style collar is one of the most commonly used in industrial settings. Its clamp is attached to the shaft by screws and has a hinge on one side. This feature eliminates the risk of the screws becoming dislodged while operating the machine.
Clamping-style shaft collars are generally made of steel or stainless steel. They can be made of aluminium, but this material has lower holding power. Stainless steel collars are a good choice for cleanroom environments because they do not outgas. They also require less maintenance. If you’re uncertain which style to choose, consult with a specialist in your field.
Clamping-style shaft collars are commonly used on industrial machinery and are an important part of gearbox maintenance. If you’re planning to install one, make sure you measure it carefully before you install it. If you don’t, you may damage the shaft or endcap. And while you’re at it, be sure to check for any kinks before you use it.
Shaft Collar

Set screw

Set screw shaft collars are the most cost-effective type of shaft collar. Available in bore sizes ranging from 3/16″ to 4″, they offer increased holding power and torque capacity. Additionally, they come with a keyway in case the shafts are keyed. Commercially produced shaft collars are non-magnetic and made of 303 stainless steel. They also come with one set screw per collar.
Shaft collars can be made of aluminum, steel, or a combination of steel. They serve multiple purposes including mechanical stops and stroke limiters, and can be adjusted for the correct fit. They are easy to install and remove, and they provide high clamping power. Custom designs are also available. They can be made of different materials to suit your specific needs.
Set screw for shaft collars are commonly used in transmission and machinery applications. Set screw shaft collars can be adjusted using a screw driver. When tightened, the set screw bites into the shaft material and holds it in place. When used properly, they can reduce the amount of torque required to hold components in place.
Shaft collars come in a variety of sizes. In general, shaft collars can range from 5/64″ to one inch in diameter. In addition, you can choose between metric and inch-sized shaft collars. When choosing a shaft collar, it is important to consider the size and bore diameter of the shaft.
China Shaft Mount TXT Reducer American Style Gearbox Gear Reducer     split shaft collarChina Shaft Mount TXT Reducer American Style Gearbox Gear Reducer     split shaft collar
editor by czh 2023-01-16